p100 monitor

[MIKE MITCHELL]

Hi Guys,
I have a L370M with osp p100 control. During start up of control you will see the BIOS start then jump to Windows XP logo with status bar. After that the screen goes blank, If you wait for the control to boot up, the machine is able to move in manual mode. It looks like the "monitor off" button is active but it is not. Swapped pcmb board with working machine, checked 12v at monitor.I would think monitor would be ok if I can see windows logo at startup.the touch screen "beeps" if you touch it. all buttons on the panels also "beep" any thoughts?
Thanks,
Mike

Similar Threads:

• Pixie P100, replacement
• Help Threading inconel 625 p100
• Need Help!- Okuma Captain L370M OSP-P100
• Pixie P100 for analog to Step/Dir
• Need Help!- P100 control problem

[kurmay]

Try to start only windows in safe mode (without OSP)

[MIKE MITCHELL]

Thanks for the response. I tried that but I cant see the monitor to cancel osp start on the touchscreen up after hitting cancel button on the machine panel

[kurmay]

You can try to press F8 button (not under of screen) from keyboard for start safe mode

[MIKE MITCHELL]

Would I need to hook up a keyboard to the pcmb or press FN F8 on the machine keyboard?

[MIKE MITCHELL]

I hooked up keyboard and mouse and booted up in safe mode successfully. Any Ideas? Reload OSP?
Thanks,
Mike

[kurmay]

I hooked up keyboard and mouse and booted up in safe mode successfully. Any Ideas? Reload OSP?
Thanks,
Mike

Reinstalling the software will fix the problem.

[MIKE MITCHELL]

only "osp" software?

[MIKE MITCHELL]

Do you possibly have a procedure my distributor is of no help.
Thanks

[kurmay]

I think problem is in windows side.