Check optical cables and TFP board
Hello everyone,
Machine software was cleaned then We installed software but system don't open. There is a error on the machine.
We changed memory board but it didn't change. Maybe our board is broken but we can't be sure. Do you have a advice for us?
Memory TEST:0000
LOAD:SYS
1-2 CPU-ALARM BUS ERROR (SYSTEM BUS PARITY)
BUS ERROR STATUS(SBER,SBPAR,CYO,0,PRT,DIA,LOP,ECC)=40
SSW=0145 ACCESS ADDRESS=003E7FF4
D0=FCC00000 D1=00000000 D2=00840000 D3=00000000
D4=003FCF00 D5=003FCFFE D6=00009000 D7=7CBFFFFF
A0=E7FFFF22 A1=00000000 A2=FCCA0000 A3=00001A44
A4=003F2024 A5=FCC00000 A6=00001000 A7=003E7FF4
US=BFFBDFEF IS=003E7FF4 MS=F9FDBAFF SR=00002000
PC=003F3400
Check optical cables and TFP board
https://www.facebook.com/okuma.tuning
Actually, we focused on Memory Board and tried to repair it. But we can't improve. Why is the problem at Optical cables and TFP board? Why did you think like this? Also, We will check them.
merheba
aderesleme hatas? sorunu çözebilirim
benimle ileti?ime geçin
-te??ekkürler
mustafakillik5020@gmail.com
We concentrated on the Memory Board and attempted to restore it. But we can't become better. What is causing the issue with the optical wires and TFP board? Why did you think this way? We will also check them.
kipas guys