OSP-P300M Programming Manuals ?

[deadlykitten]

hy, is all alright, do you still need help ?

[maketm]

programing

special functions 1

special functions 2

anything else ? there are ~25 manuals, but ...

*3 posts, because of upload size limitation

@deadlykitten

Thank You !

Hello friends, can you upload the shared files again?

[maketm]

hello friends,
In the Fanuc system;
#3011 (YYYYMMDD)
#3012 (minute seconds to hour)
working as
I use #101=#3011 and #102=3012.

Okuma Osp-p 300MA
What is the equivalent and how should I define it?

Thanks in advance

[phucle88]

I wondering if someone can help me understand the probing cycle program below.
I would like to understand the PA PI PE....and more
Thanks

G00 G17 G20 G40 G80 G90
G00 Z=VPPLZ
(_RENGCODE_END)

(PRODPLUS_BEGIN)
M5
G15 H55
G90
CALL O2109 PA=1. PC=1. PI=0.059 PD=2. PE=2. PH=1. PM=0. PQ=0. PR=0. PT=1 PV=2. PW=9. PZ=1.
CALL O2300 PA=135. PB=12. PC=1. PD=0. PE=0. PF=0.25 PV10=13.12
$PH=0. PI=0.1 PJ=1. PK=0. PV12=0.1969 PM=1. PV14=2. PV15=4. PV16=0.059 PQ=5.
VS[3]=0.25
CALL O2108 PB=55. PI=0. PJ=1. PC=0. PD=0. PF=1. PH=1. PK=55.
$ PQ=0. PR=3. PS=4. PU=1. PV=1. PW=1. PX=1. PY=2.
CALL O2007
(PRODPLUS_END 0004)
(_RENGCODE_START 0005)

G00 Z=VPPLZ
M01

[deadlykitten]

Hello friends, can you upload the shared files again?

hy maketm i am sorry for being such late, i saw this only now ... do you still need those manuals ?

I wondering if someone can help me understand the probing cycle program below.

hy phucle i searched for O2109 2300 2108 2007, and found nothing in manuals, nor on forum

so let's find those 1st ... if p300 machine, please do an in-file search in MD1 and OSP-P

for more key words, run the code in step-by-step, wait to reach the inside of those soubroutines, and check & search the code from there

please feel free to ask anything / kindly

[Superman]

I wondering if someone can help me understand the probing cycle program below.
I would like to understand the PA PI PE....and more
Thanks

G00 G17 G20 G40 G80 G90
G00 Z=VPPLZ
(_RENGCODE_END)

(PRODPLUS_BEGIN)
M5
G15 H55
G90
CALL O2109 PA=1. PC=1. PI=0.059 PD=2. PE=2. PH=1. PM=0. PQ=0. PR=0. PT=1 PV=2. PW=9. PZ=1.
CALL O2300 PA=135. PB=12. PC=1. PD=0. PE=0. PF=0.25 PV10=13.12
$PH=0. PI=0.1 PJ=1. PK=0. PV12=0.1969 PM=1. PV14=2. PV15=4. PV16=0.059 PQ=5.
VS[3]=0.25
CALL O2108 PB=55. PI=0. PJ=1. PC=0. PD=0. PF=1. PH=1. PK=55.
$ PQ=0. PR=3. PS=4. PU=1. PV=1. PW=1. PX=1. PY=2.
CALL O2007
(PRODPLUS_END 0004)
(_RENGCODE_START 0005)

G00 Z=VPPLZ
M01

The PA, PB, PW etc are strings that hold variables, that are applied within the CALL of a subroutine. The subs you haven't posted.

[cricketidlogin]

Kingbook247 Login, Website: https://cricketidpro.in/cricket-id/