Need help loading a program into an OSP5020M control

[Jbingle4210]

Hey folks! I need some help on how to get a program into my controller. Okuma mill with an OSP5020M control. I've got a portable DNC box and the RS232 cable is hooked up. I've been able to send a program to the DNC but not from the DNC to the machine. I'm not sure I'm talking to it correctly. I've tried PIP read .. nothing .. I've tried PIP CN0 .. nothing. How do I do it? What is it looking for? I have a $xxxx.min% at the beginning of the program and a % at the end. It's driving me crazy.

Similar Threads:

• EMCO 120/Emco Control - Loading Program from Windows Based (like Cimco, etc)
• Need Help!- Loading NC program
• LOADING PROGRAM
• Need Help!- loading program
• help with loading program from card to oi fanuc control

[lshingleton]

RS232 cable is null modem ?
WIll only allow download to PC not upload to machine if its the wrong type