Need Help! OKUMA MA-400HA


Results 1 to 3 of 3

Thread: OKUMA MA-400HA

  1. #1
    Member zufan4's Avatar
    Join Date
    Nov 2016
    Location
    United States
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default OKUMA MA-400HA

    M19 orients the spindle to "zero" for the tool change operation. Is there a way to orient the spindle and lock it at a specific angle/rotation?

    Similar Threads:


  2. #2
    Member zufan4's Avatar
    Join Date
    Nov 2016
    Location
    United States
    Posts
    20
    Downloads
    0
    Uploads
    0

    Default Re: OKUMA MA-400HA

    FYI, I figured it out.

    M19 RS=45
    Make sure there is a space between 9 and R
    45 would be the angle



  3. #3
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    4131
    Downloads
    0
    Uploads
    0

    Default Re: OKUMA MA-400HA

    yes, if you put it like that, is ok

    but the way you asked initially, was like hoping for a break to be there, to lock it ...

    we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

OKUMA MA-400HA

OKUMA MA-400HA