MU6300 c rotation

[lbuckner]

My company has 3 MU6300, without the lathe features. Im looking for a way to spin c axis constant and be able to run a programs, Is there any information on being able to do this?

Similar Threads:

• Need Help!- HS-1 RP pallet rotation
• Frame rotation
• Why no rotation?
• rotation
• G&L rotation

[kurmay]

Control Unit?

[deadlykitten]

hy ibuckner only thing that i can suggest is G01 359.999 G91 Feed_max, so to reach a higher rpm as it can get

still, motion may be discontinued, so use an insert that can take a beating, like carbide for heavy interuption or hss

it will take long, maybe will work for roughing, and finish it by milling ?

please, what osp it is ? kindly

[lbuckner]

hy ibuckner only thing that i can suggest is G01 359.999 G91 Feed_max, so to reach a higher rpm as it can get

still, motion may be discontinued, so use an insert that can take a beating, like carbide for heavy interuption or hss

it will take long, maybe will work for roughing, and finish it by milling ?

please, what osp it is ? kindly

We have 2 osp-p300ma-h and1 osp-p300m-h controls.

- - - Updated - - -

We have 2 osp-p300ma-h and1 osp-p300m-h controls

[kurmay]

Hi lbuckner

Please enable your Private Message

[kurmay]

My company has 3 MU6300, without the lathe features. Im looking for a way to spin c axis constant and be able to run a programs, Is there any information on being able to do this?

if model name has L identificator (for example MU6300V-L) , your machine capabilities turning specification.

[OkumaWiz]

Have you tried a C with a Q value for number of rotations? I'm not sure if it will work on that machine or not since it's more of a lathe thing.

[lbuckner]

I enabled my messages