hy pls check attached
if it won't work, then pls share your bigger program / kindly
Good morning!
I have a little mistake
I love Hi-Cut Pro, i use everyday on my Genos M560.
But i have a little mistake.
On P300L and P300SA, Hi-Cut work but not always.
If i make i single program, example:
G50S2400
T1010
G94M110
SB=1000M13
G0X50Z10
G137C0
G17
G265
G1F1000
...
G264
G136
G0Z800M9M12
M30
Work perfect without problem, with a single program. I look in specific page Hi-Cut is on and really work amazing.
If i try to put this program in other program, a long program with a lot of tool, nothing, don't work.
Don't work.
Impossible to activate Hi-Cut.
Where is the mistake?
Why don't work?
I have this issue, i try a lot of system but nothing.
I hope you can save me!
Similar Threads:
hy pls check attached
if it won't work, then pls share your bigger program / kindly
Last edited by deadlykitten; 04-04-2022 at 07:36 AM.
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...