LT15 OSP7000L Can't get a program to run alarm 2477-01

[10kftView]

Hello,

We've aquired this machine and would consider ourselves beginners on lathes/Okuma controls as a whole. I've got every book with the machine and thought I'd created an extremely basic program to see it do something but I'm mistaken with this alarm code. I've attached a picture of the program and alarm in hopes someone makes me feel like the newbie I am and offers an easy fix. I have no sample programs in the machine to base anything off of but did see it run programs before we shipped it here. Appreciate any help!

Similar Threads:

• Need Help!- Okuma LCC-15, OSP7000L alarm 1206 and 1211
• Need Help!- stopping program and opening door OKUMA OSP7000L
• Need Help!- OKUMA LT15-M LATHE 1309-13 Alarm A
• Need Help!- need program for okuma lb-15II. osp7000L.
• Okuma LT15 - OSP7000L HELP.

[lshingleton]

First find out what G110 is doing ? Someone has created that in a Sub program file ?-----------I will be in the Macro screen as G110 and linked to a program ?
This is a 4 axis lathe with two turrets like the LU15 Was ?
Dont need G18 not that i remeber

Many yrs ago i worked on Cadets/Crwons/MX40/50 and Someother ones but been a while lol

[OkumaWiz]

G110 is for engaging your C axis.

First things first… you need to tell it which spindle you are working with. G140 for main or G 141 for sub.

Do you have the manual for sub spindles for that machine?

Best regards,

[broby]

G110 is for engaging your C axis.

First things first… you need to tell it which spindle you are working with. G140 for main or G 141 for sub.

Do you have the manual for sub spindles for that machine?

Best regards,

Isn't M110 for C axis engage, With M109 for disengage?
Been a looooooong time since I worked on a machine with live tooling.
Brian.

[MCR-B II]

Which turret with which spindle is running. You have to write these commands in first rows.

[OkumaWiz]

Isn't M110 for C axis engage, With M109 for disengage?
Been a looooooong time since I worked on a machine with live tooling.
Brian.

Oops! You are correct… the M vs G didn’t even register!

I think G 110 and G111 are for which spindle G96 is active on if I remember correctly.

[broby]

Oops! You are correct… the M vs G didn’t even register!

I think G 110 and G111 are for which spindle G96 is active on if I remember correctly.

Yep, G110 is prioritising the upper turret when using constant surface speed, G111 is the Lower turrent priority.

[OkumaWiz]

This will give you some code to chew on for a while...be careful not to bite off too much to chew!