Spindle orientation sequence/M code

[Fireater]

I recently had issues with my machine not moving, tried to rotate tool arm manually thinking that may have caused it due to it maybe out of sequence and then that became stuck in with tools in it. Oh boy.... I believe I corrected that through the procedures and a little help on here as the arm is back at home now and all tools are out but still no spindle orientation completed yet. I believe the initial problem was that my spindle is not in the right orientation. Does anyone have the procedure to right this wrong??? Thanks in advance....

Similar Threads:

• pls, when using igf, is it possible to avoid the M05, before a g-code sequence ?
• Need Help!- Spindle error 'excess phase sequence' 6t
• Need Help!- Spindle Orientation
• Picomax 82 HSC-Spindle spindle orientation
• Need Help!- Multus B300w Sequence restart error on sub spindle

[Superman]

Does anyone have the procedure to right this wrong??? Thanks in advance....

Yeah.... push the toolchange button
Really.....how many different machines, & controls
Is it a lathe or mill, what control, what sequence number is it showing, is there any residual move waiting to occur ... a little more info ..

[OkumaWiz]

M19

;-)