To Okuma Corporation


Results 1 to 7 of 7

Thread: To Okuma Corporation

  1. #1
    Member
    Join Date
    Oct 2009
    Location
    world
    Posts
    94
    Downloads
    0
    Uploads
    0

    Default To Okuma Corporation

    Hello

    The pulse handle system in double columns is not. useful. Cable is short and pendant arm very heavy. A remote control pulse handle with a 5 inch
    screen would be better. Of course CE regulations will change. Regulations also should be changed. It is not a boarder.

    Similar Threads:


  2. #2
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    3526
    Downloads
    0
    Uploads
    0

    Default Re: To Okuma Corporation

    hy is it worth it, if you replace it with a longer cable ? what table size is your mcr ?

    on your phone, you could use an app that shows osp screen; some persons use a tablet ( because it has a bigger scrren ), that is conected via teamviewer

    you could also consider a case for it, so to protect it from chips

    if you wish to go remote, then you can configure an app on the osp, that takes input from tablet, via teamviewer, and passes it to the controller; api, or without it

    if you wish, i can help you / kindly

    Last edited by deadlykitten; 10-16-2021 at 04:31 PM.
    - parameter's value doesn't matter, what matters is consistency
    - you can reduce cycle time not by reducing it, but by reducing it's uncertainty


  3. #3
    Member Algirdas's Avatar
    Join Date
    Mar 2009
    Location
    United Arab Emirates
    Posts
    1695
    Downloads
    0
    Uploads
    0

    Default Re: To Okuma Corporation

    Thank you for valuable input, Mr. MCR-B II. I guess, you are new to this field.
    Okuma will drop the design philosophy and follow your advice instantly. The old machines will be retrofited. Is that OK with you?



  4. #4
    Member
    Join Date
    Oct 2009
    Location
    world
    Posts
    94
    Downloads
    0
    Uploads
    0

    Default Re: To Okuma Corporation

    Quote Originally Posted by deadlykitten View Post
    hy is it worth it, if you replace it with a longer cable ? what table size is your mcr ?

    on your phone, you could use an app that shows osp screen; some persons use a tablet ( because it has a bigger scrren ), that is conected via teamviewer

    you could also consider a case for it, so to protect it from chips

    if you wish to go remote, then you can configure an app on the osp, that takes input from tablet, via teamviewer, and passes it to the controller; api, or without it

    if you wish, i can help you / kindly
    Thank you for your reply.

    Table sizes from 3 meter to 8 meter.. But who prepares remote api app.. Is there an app. for okuma.

    kindly



  5. #5
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    3526
    Downloads
    0
    Uploads
    0

    Default Re: To Okuma Corporation

    no, there is no app for that, but i can try to help you is your osp windows based ? do you have io monitor ?

    - parameter's value doesn't matter, what matters is consistency
    - you can reduce cycle time not by reducing it, but by reducing it's uncertainty


  6. #6
    Member
    Join Date
    Oct 2009
    Location
    world
    Posts
    94
    Downloads
    0
    Uploads
    0

    Default Re: To Okuma Corporation

    Quote Originally Posted by deadlykitten View Post
    no, there is no app for that, but i can try to help you is your osp windows based ? do you have io monitor ?
    Yes Windows 10 io monitor yes



  7. #7
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    3526
    Downloads
    0
    Uploads
    0

    Default Re: To Okuma Corporation

    okey please check your private message

    - parameter's value doesn't matter, what matters is consistency
    - you can reduce cycle time not by reducing it, but by reducing it's uncertainty


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

To Okuma Corporation

To Okuma Corporation

To Okuma Corporation