what if G90 Z999 ?
or you want use some specific Z "home" not the simple max?
How do I send the Z axis home on the Okuma OSP-E100M? G91 G28 Z0.0 doesn't work.
Thanks in Advance,
FMJ
Similar Threads:
- Need Help!- Zero Reference Return Problem.
- HELP! WITH OKUMA OSP E100M
- Need Help!- OSP-E100M control info
- Need Help!- Reference return incomplete
- Return through reference point?
what if G90 Z999 ?
or you want use some specific Z "home" not the simple max?