OKUMA OSP700M
Hello everyone,
Does anyone have a post for OSP700M control. I am using Mastercam X4 (old version I know).
Any help would be appreciated. Thank you in advance.
Kind Regards,
BP
Similar Threads:
- Okuma cadet mill with osp700m
- Need Help!- New to Okuma OSP700M
- Need Help!- G112 for Okuma OSP700M
- Okuma OSP700M
Re: OKUMA OSP700M
The programming has been very consistent from the 5020 to the current P300 control so most any post for your type of machine will work. Find a post for a machine with the same axis count and it should work.
The main thing that changes between the controls is the system variable mapping and how to access them. This is not your typical programming in a post so you’re probably going to be Okay with the output code.
Best regards,
Experience is what you get just after you needed it.
Re: OKUMA OSP700M
I will check it out. Thank you buddy!
Posting Permissions
Reply with Quote