Build Thread Okuma MX 45VAE Floppy conversion to USB


Results 1 to 3 of 3

Thread: Okuma MX 45VAE Floppy conversion to USB

  1. #1
    Member Fireater's Avatar
    Join Date
    Feb 2021
    Posts
    24
    Downloads
    0
    Uploads
    0

    Default Okuma MX 45VAE Floppy conversion to USB

    I have a 1999 MX 45VAE with a 3.5 floppy drive wondering if anybody has a solution to convert over to USB without going to Okuma or distributer

    Similar Threads:


  2. #2
    Member Algirdas's Avatar
    Join Date
    Mar 2009
    Location
    United Arab Emirates
    Posts
    1473
    Downloads
    0
    Uploads
    0

    Default Re: Okuma MX 45VAE Floppy conversion to USB

    I would recommend use RS232 instead. There are many USB or TCP/IP to RS232 converters available.



  3. #3
    Member kurmay's Avatar
    Join Date
    Aug 2011
    Location
    Haiti
    Posts
    287
    Downloads
    3
    Uploads
    0

    Default Re: Okuma MX 45VAE Floppy conversion to USB

    You can use Gotek SFR1M44-U100K with correct jumper setting

    the secret is out


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Okuma MX 45VAE Floppy conversion to USB

Okuma MX 45VAE Floppy conversion to USB

Okuma MX 45VAE Floppy conversion to USB