OKuma Howa 2SP-35HG Chucking Direction


Results 1 to 3 of 3

Thread: OKuma Howa 2SP-35HG Chucking Direction

  1. #1
    Member
    Join Date
    Mar 2011
    Location
    USA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default OKuma Howa 2SP-35HG Chucking Direction

    Would anyone by chance know how to change the chucking direction ID/OD on a Okuma-Howa 2SP-35HG with a Fanuc 18T Control? There's no key or switch for it. If anyone maybe has a manual for this machine that would be great too! Thank you!

    Similar Threads:


  2. #2
    Member kurmay's Avatar
    Join Date
    Aug 2011
    Location
    Haiti
    Posts
    282
    Downloads
    3
    Uploads
    0

    Default Re: OKuma Howa 2SP-35HG Chucking Direction

    Try M88 and M89 codes for chucking direction.

    Nothing.


  3. #3
    Member
    Join Date
    Mar 2011
    Location
    USA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: OKuma Howa 2SP-35HG Chucking Direction

    Already did! Nothing.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

OKuma Howa 2SP-35HG Chucking Direction

OKuma Howa 2SP-35HG Chucking Direction

OKuma Howa 2SP-35HG Chucking Direction