Okuma G04 dwell time remaining display

[jjjearls]

I have an Okuma MX-45VAE with OSP-U100M control. When I use the dwell code G04, I cannot find on any screen where it displays how much time has elapsed or how much time is remaining in the dwell. Is it just not there? Or is it hidden in plain sight?

Similar Threads:

• SC10 tap bottom dwell time
• Okuma LB15 Chuck Dwell Problem
• Need Help!- fanuc 10m dwell time
• warmup program: dwell time is incorrect if set > 60 seconds
• Dwell time

[OkumaWiz]

It's not there until the E-100 control as far as I know, then it shows up on the F register counting down.

Best regards,

[deadlykitten]

hy why do you need to see the countdown ? maybe there is a way arround this

[jjjearls]

Thanks OkumaWiz. My other machines (Fanuc, Seicos) have the countdown and you can't miss it. It just seemed like common sense to me. Oh well, it's not a big deal, just a nuisance. I guess I'll stop looking for it...