Program select from floppy

[MCR-B II]

Hi everybody

Our LU 15M machine is running from disket driver but MB 56 machine doesn't run from floppy diskett driver.
?t gives 5261 error

Similar Threads:

• Need Help!- USING MACRO/SUBROUTINES TO SELECT BOLT HOLES IN A PROGRAM
• Need Help!- USING MACRO/SUBROUTINES TO SELECT BOLT HOLES IN A PROGRAM
• Can't load program from floppy
• Problem- Program tool pot select on an umbrella?
• Program load/select list on V2XT Boss XT 3.4 control

[Algirdas]

What is your point? You want to transfer part program from the lathe to MC ?
In my understanding both LU15M and MB56 should run even with floppy drive detached, but most likely it is not your question here.

[MCR-B II]

I mean program select and cycle start

[Algirdas]

clear. First of all, do you see ( on OSP ) the contents of the floppy?
Is the floppy Okuma OSP format or MS-DOS format?

[MCR-B II]

Yes I see inside of floppy. It is OSP format.

[machinehop5]

..720 or 1.44 format

5,25 disk?

[MCR-B II]

1.44 format copying ok but program select no it is option or parametric ?

[kurmay]

1.44 format copying ok but program select no it is option or parametric ?

Program select from floppy is option.
it is a special function and can be activated.