Okuma OSP U10L floppy disk files with DNC-B option

[huynhdung92]

Hi guys,
I just bought an Okuma V4020 with OSP U10L. I found out that the machine doesn't have DNC option so I decided to try to attach a DNC (DNC-B) for it.
Could anyone help me by sending me the data of the floppy disks of the same machine which has DNC-B option?
I really need it to upgrade my machine so please help me.
My Email: huynhadung1408@gmail.com.
Thanks,
Dannis

Similar Threads:

• Okuma 700M Memory Disk Format Error and Floppy Disk Read/Write Error
• Need Help!- Okuma lb 15 osp 5000L-G Paramter Floppy disk information
• New Machine Build- okuma osp u10l
• Need Help!- okuma OSP-U10L
• 840D Floppy backup but not files on disk

[Algirdas]

What about hardware side of the option? DNC-B option is not software product only for this machine. Check your OSP data management card, if your RS232 port is capable enough.

[huynhdung92]

Well, I think I will reinstall the control for the machine to understand the Dnc first. Then, I will find and attach dnc hardware on the machine.

[Algirdas]

I would say hardware installation first and software at the end :-)