Please, what is it you are trying to achieve?
Maybe I could help?
hello please, is it possible to superimpose 2s+t lathes ? like when drilling, or turning same id/od on both spindles ?
or is there a ' trick ' ? kindly
Similar Threads:
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
Please, what is it you are trying to achieve?
Maybe I could help?
hy broby such a lathe should arrive soon ( ± ), and there is a simple, repetitive job, that will be moved to it
part is almost simetrical, now being faced + od + half id + cut, then flipped in order machine the other id half
i was thinking if it would be possible to machine, simultaneously, both id halfves / kindly
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
Can you supply a drawing?
hy broby, is a simple one : od 55±0.2 x id 37.5+0.2 x length 145±0.5, machined from a pipe od 56 x id 35 do you still wish for a drawing, or anything else, like tools, other details ? thank you
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
hello all i solved this 9 months ago
such a function is more used in the gang lathes enviroment, while okuma is missing a 2nd linear axis on the 2nd spindle, so this results in some limitations
even so, it works flawless for common simple parts, thus the extra mobility of a gang may not be required
please feel free to ask anything / kindly
Last edited by deadlykitten; 07-16-2023 at 06:19 AM.
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...