OSP 100 Battery alarm 4035

[Green Button]

Hi,

Machine Macturn350 OSP100

4035 ALARM- D Memory board/battery change 2
2) A a certain period has passed since the software was initialised installed

Has anyone instructions for this? Is there date in parameters which should be change after battery replace?

Thanks,

GB

Similar Threads:

• 2100 NCK ALARM 810D - NEED TO CHANGE BATTERY - WHERE IS THE BATTERY LOCATED?
• Alarm 4035
• Problem- OKUMA LCS15 build in 1994 OSP700 ALARM-D 4035 battery change 2
• Need Help!- Memory board/battery alarm 4035
• Problem- 4035 Alarm-D

[OkumaWiz]

The battery has a set timer on it that will go off weather the bat is going dead or not. You can go to the battery page in your parameters and advance it a bit to get rid of the alarm temporarily but it’s best to replace it and set the date ahead by the several years as recommended. Was it seven? I forget...maybe my battery is getting weak... ;-)

You will probably have to unhide the parameter page using display change.



Best regards,

[Green Button]

I have not found battery info page on OSP100 ? Which parameter page is it ?
Thanks,
GB

[kurmay]

What is the OSP100?

U100 , E100 or P100, which?

[Green Button]

it's U100L
Model year:2003

[Green Button]

Designer of this battery system has drinked sake. A lot.
I found instructions here:
https://www.cnczone.com/v...cedure-277828/
Biggest problem was to found 3,5 inch floppy...
Good luck to anyone with this problem.

[Crivera]

OSP 100
Is the control model information

[Crivera]

Does anyone have the procedure on how to replace the batteries
on the osp 100 and t he osp 200