Need Help! 948 tfp field net communication error


Results 1 to 2 of 2

Thread: 948 tfp field net communication error

  1. #1
    Member MWatt's Avatar
    Join Date
    Aug 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default 948 tfp field net communication error

    I have a 7000 control that’s giving grief. Did some reading and lots mentioned it’s almost always fibre cables. They have all been changed, we have tried a new tfp board and fub as well. The code showing up next to the alarm message is 102FFFF. Any advice would be greatly appreciated.

    Similar Threads:


  2. #2
    Member MWCnc's Avatar
    Join Date
    Aug 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by MWatt View Post
    I have a 7000 control that’s giving grief. Did some reading and lots mentioned it’s almost always fibre cables. They have all been changed, we have tried a new tfp board and fub as well. The code showing up next to the alarm message is 102FFFF. Any advice would be greatly appreciated.
    Check access adress.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

948 tfp field net communication error

948 tfp field net communication error

948 tfp field net communication error