How to add spring passes using G71 threading cycle


Results 1 to 2 of 2

Thread: How to add spring passes using G71 threading cycle

  1. #1
    Registered Will_9650's Avatar
    Join Date
    Dec 2018
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default How to add spring passes using G71 threading cycle

    I'm new to the Okuma control (OSP-P300L-R Control). The machine is a Genos L250E. I am using a G71 to cut an internal thread:

    G71 X.750 Z-1.39 H.05 D.008 U.002 B60 F1. J20 M73 M33 A0

    The tool makes only one pass at the final diameter. How do I add spring (zero) passes?

    Thanks!



  2. #2
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    4131
    Downloads
    0
    Uploads
    0

    Default Re: How to add spring passes using G71 threading cycle

    we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How to add spring passes using G71 threading cycle

How to add spring passes using G71 threading cycle