Need Help! Okuma OSP U100m DNC Parameter


Results 1 to 2 of 2

Thread: Okuma OSP U100m DNC Parameter

  1. #1
    Member mechanic-master's Avatar
    Join Date
    Mar 2020
    Posts
    5
    Downloads
    0
    Uploads
    0

    Post Okuma OSP U100m DNC Parameter

    Where I work we have an Okuma MCR-BII double column machine with U100M control. I am looking for some way to know if I can activate the DNC, because the machine does not have the option in the button that the manual mentions.

    I have read that the DNC is optional in this type of machine, so I really don't know if it has it, previously this machine was in the Japanese language, and the software was changed to the English language.

    I thought that probably the machine has disabled the DNC function with some parameter.

    I have some manuals downloaded from the internet, but they are not entirely clear to answer my question.

    I attach two images where you can see the difference between what the manual has and what our machine has.

    If anyone can help me I would really appreciate it.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Okuma OSP U100m DNC Parameter-bokuma2-jpg   Okuma OSP U100m DNC Parameter-bokuma1-jpg  
    Understanding an engineer is more complicated than a Fast Fourier Transform, your thoughts are like an integrated circuit.


  2. #2
    Member OkumaWiz's Avatar
    Join Date
    Apr 2009
    Location
    United States
    Posts
    1051
    Downloads
    0
    Uploads
    0

    Default Re: Okuma OSP U100m DNC Parameter

    The DNC-B option that you have requires both hardware and software options in order to run. They will normally add a solid state hard drive to the machine of about 500mb as part of the upgrade. Considering that your control is 4 generations old, the chances that the hardware is still available is slim. Your local Okuma rep can probably still get the software thru Okuma, but the hardware may be discontinued. You will also be asked to get out a thick wallet...5-10K??

    Best regards,

    Experience is what you get just after you needed it.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Okuma OSP U100m DNC Parameter

Okuma OSP U100m DNC Parameter

Okuma OSP U100m DNC Parameter