USB EMULATOR OKUMA OSP7000


Results 1 to 2 of 2

Thread: USB EMULATOR OKUMA OSP7000

  1. #1
    Member
    Join Date
    Dec 2018
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default USB EMULATOR OKUMA OSP7000

    I just got a late 1990s okuma with a USB emulator however i can't figure out how to punch out programs to save on USB drive
    or how to transfer my own programs from the USB to the control

    does anybody here have experience with this? thanks

    Similar Threads:
    Last edited by MORIMAZAK; 07-11-2020 at 11:52 AM.


  2. #2
    Member
    Join Date
    Dec 2018
    Posts
    9
    Downloads
    0
    Uploads
    0

    Default Re: USB EMULATOR OKUMA OSP7000






  3. #3
    Vasiliy1's Avatar
    Join Date
    May 2020
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: USB EMULATOR OKUMA OSP7000

    You need to prepare the flash drive using the program: USB_Floppy_Manager_v1.40i

    This program emulates a flash drive as a disk drive and splits it into many drives 1.44-choosing numbers from 00-99 you can choose the recording area, loading.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

USB EMULATOR OKUMA OSP7000

USB EMULATOR OKUMA OSP7000

USB EMULATOR OKUMA OSP7000