LB15 "2561 RS232C ready interrupt time out error"


Results 1 to 6 of 6

Thread: LB15 "2561 RS232C ready interrupt time out error"

  1. #1
    Member
    Join Date
    Jul 2007
    Location
    australia
    Posts
    102
    Downloads
    0
    Uploads
    0

    Default LB15 "2561 RS232C ready interrupt time out error"

    On my LB15 (1990) all of a sudden when I try to send data to the lathe I get this error "2561 RS232C ready interrupt time out error".

    From lathe to PC no issues. Never see this before.

    Same cable same programs. Any ideas?

    Similar Threads:


  2. #2
    Member kurmay's Avatar
    Join Date
    Aug 2011
    Location
    Haiti
    Posts
    258
    Downloads
    1
    Uploads
    0

    Default Re: LB15 "2561 RS232C ready interrupt time out error"

    Maybe there is a wrong parameter set

    MN_^J<DAK?;BGL1345TU@C2=HI


  3. #3
    Member
    Join Date
    Jul 2007
    Location
    australia
    Posts
    102
    Downloads
    0
    Uploads
    0

    Default Re: LB15 "2561 RS232C ready interrupt time out error"

    Quote Originally Posted by kurmay View Post
    Maybe there is a wrong parameter set
    Yes I suspect you maybe correct, I just tried a second PC and it does the same ie CNC to PC ok but PC to CNC after data transmits I get the time out error.

    For the LB15 lathe with a 5000 L-G control do you know the parameters?



  4. #4
    Member OkumaWiz's Avatar
    Join Date
    Apr 2009
    Location
    United States
    Posts
    1036
    Downloads
    0
    Uploads
    0

    Default Re: LB15 "2561 RS232C ready interrupt time out error"

    Your error message means that it is not receiving the “go” signal in the allotted time. Check Parameters like Kurmay says to see if XON/XOFF or software handshaking is selected. Not very likely the machine settings changed but much more possible on the PC. Check there first then be sure to READ on the machine before sending from the PC.

    Best regards,

    Experience is what you get just after you needed it.


  5. #5
    Member kurmay's Avatar
    Join Date
    Aug 2011
    Location
    Haiti
    Posts
    258
    Downloads
    1
    Uploads
    0
    MN_^J<DAK?;BGL1345TU@C2=HI


  6. #6
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    509
    Downloads
    0
    Uploads
    0

    Default Re: LB15 "2561 RS232C ready interrupt time out error"

    ...good time to backup the Parameters what ever they are set at currently...if you can still send to PC. other possible things to check I've seen failed/weak memory batterys cause problems. Bad grounding, RF noise near the cable.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

LB15 &quot;2561 RS232C ready interrupt time out error&quot;

LB15 &quot;2561 RS232C ready interrupt time out error&quot;

LB15 &quot;2561 RS232C ready interrupt time out error&quot;