Need Help! Need Okuma software


Results 1 to 7 of 7

Thread: Need Okuma software

  1. #1
    Member
    Join Date
    Sep 2008
    Location
    Canada
    Posts
    138
    Downloads
    0
    Uploads
    0

    Default Need Okuma software

    Dear all

    I have Okuma MDB with OSP-7000M, the battery was flat, so I need the software for reinstall to my machine, I'm willing to buy it

    Thanks

    Similar Threads:


  2. #2
    Member OkumaWiz's Avatar
    Join Date
    Apr 2009
    Location
    United States
    Posts
    1262
    Downloads
    0
    Uploads
    0

    Default Re: Need Okuma software

    All machines come with software in the electrical cabinet. If yours is gone, then you will need to get a new set from Okuma through your local distributor. Software is machine specific by serial number although if you can find the same machine with the same hardware spec, their software will work in a pinch.

    Best regards,

    Experience is what you get just after you needed it.


  3. #3
    Member
    Join Date
    Sep 2008
    Location
    Canada
    Posts
    138
    Downloads
    0
    Uploads
    0

    Default Re: Need Okuma software

    Thanks you very much . But I'm still want to find the software not from Okuma local distributor



  4. #4
    Member OkumaWiz's Avatar
    Join Date
    Apr 2009
    Location
    United States
    Posts
    1262
    Downloads
    0
    Uploads
    0

    Default Re: Need Okuma software

    So it’s software is gone from the electrical cabinet? There are only a handful of those machines around and most are built with very specific options. That control is 4 generations old so your odds aren’t too good.

    Just so you know...

    Experience is what you get just after you needed it.


  5. #5
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    4131
    Downloads
    0
    Uploads
    0

    Default Re: Need Okuma software

    I'm still want to find the software not from Okuma local distributor
    hy, with a bit of luck, you may succed ... but i am reserved about chances

    like mr wizard said, software is unique for each machine; even on modern identical machines, you can not install same software pack

    i am not sure if the software also includes machine parameters, as i once heared that someone failed to install the osp, so it was needed that a japanese would came and re-initialize his parameters

    those software are pretty well packed ( okuma protection ), making it hard for a mere mortal to make a software compatibile across different machines

    in the end, you may still need to contact an okuma agent / kindly

    we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...


  6. #6
    Member OkumaWiz's Avatar
    Join Date
    Apr 2009
    Location
    United States
    Posts
    1262
    Downloads
    0
    Uploads
    0

    Default Re: Need Okuma software

    At the top hit the POST NEW THREAD button.

    Experience is what you get just after you needed it.


  7. #7
    Member
    Join Date
    Apr 2006
    Location
    Viet Nam
    Posts
    111
    Downloads
    0
    Uploads
    0

    Default Re: Need Okuma software

    Quote Originally Posted by greenery_fr View Post
    Dear all

    I have Okuma MDB with OSP-7000M, the battery was flat, so I need the software for reinstall to my machine, I'm willing to buy it

    Thanks
    Hi
    Has your CNC machine been repaired yet? I have the solution without the original software disk that came with the machine



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need Okuma software

Need Okuma software