I started working with it a few years back when the job fell in my lap when the person walked out on the job. So keep this in mind that I've not been trained well and will need step by step instructions.
Our work place replaced the server that it was connected to, everything is setup right. I just need to know how to change the file upload path on the Okuma so it can grab files from the right hard drive. It's old path is setup on /f hard drive on the server, I need to know how to change it to /T hard drive on the Okuma.
I think in order to do it you need to access the 'Remote Path' that is entered by the user in the 'DNC-T Device Setting' utility program. Following this pattern, you can add or modify keys as well. They are stored in the registry in the following location: HKEY_LOCAL_MACHINE\SOFTWARE\OKUMA\DNC-T\. I hope my article will help you a bit. Now I have my own question. I am thinking about what fiber engineering company I should choose to replace my wireless network utilities. Do you have any in your mind as well?
Reply with Quote
Okuma MX-55VB OSP-U10M
Posting Permissions
