okuma 20lc


Results 1 to 6 of 6

Thread: okuma 20lc

  1. #1
    Member
    Join Date
    Mar 2016
    Location
    Palestinian Territory, Occupied
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default okuma 20lc

    dear all,
    hope you are doing well and safe.

    i face problem in okuma 20lc. unfortunately, there is no user manual and no maintenance manual.
    the error is "SPB verisio e7". it looks the machine is not booting to system. please help me to make the machine run.
    best regards

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2010
    Location
    Russia
    Posts
    190
    Downloads
    0
    Uploads
    0

    Default Re: okuma 20lc

    Please make photo of OKUMA display. I need the error number.



  3. #3
    Member
    Join Date
    Mar 2016
    Location
    Palestinian Territory, Occupied
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default Re: okuma lc20

    hi , i think the system is not booting , and i need the parameters. i can't catch more photos right now, because the government instructions against corona virus. the city is closed. but i have these photos


    okuma 20lc-91025553_1576181382521028_2960100381050273792_n-jpg


    . okuma 20lc-91397979_2418732041751093_1884068205610139648_n-jpg

    Attached Thumbnails Attached Thumbnails okuma 20lc-91025553_1576181382521028_2960100381050273792_n-jpg   okuma 20lc-91397979_2418732041751093_1884068205610139648_n-jpg  


  4. #4
    Member
    Join Date
    May 2010
    Location
    Russia
    Posts
    190
    Downloads
    0
    Uploads
    0

    Default Re: okuma 20lc

    If I understood, your OKUMA frozen o this message: SBP Versio e7.
    If it is so, looks like bubble memory is broken. But please check all power supply in the electrical cabinet. Make photo of power supply unit after the lathe will be frozen. May be some of supplu (+5, +12 of other) broken.
    I destroy me bubble memory after one of my power disappeared. The sequence of voltage in CPU unit is strict. And wrong sequence can destry data in memory. It was my lathe. After that I changed the CNC to China.
    It was more cheaper then repaire machine, but I lost accurace.



  5. #5
    Member
    Join Date
    Mar 2016
    Location
    Palestinian Territory, Occupied
    Posts
    33
    Downloads
    0
    Uploads
    0

    Default Re: okuma 20lc

    thanks, i will check when i reach the machine.



  6. #6
    Member OkumaWiz's Avatar
    Join Date
    Apr 2009
    Location
    United States
    Posts
    1166
    Downloads
    0
    Uploads
    0

    Default Re: okuma 20lc

    Could be service board processor as well , good idea to reseat the boards and any “socketed” chips as well. Sometimes connection becomes bad and causes communication alarms like you have.

    Best regards,

    Experience is what you get just after you needed it.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

okuma 20lc

okuma 20lc

okuma 20lc