Please make photo of OKUMA display. I need the error number.
dear all,
hope you are doing well and safe.
i face problem in okuma 20lc. unfortunately, there is no user manual and no maintenance manual.
the error is "SPB verisio e7". it looks the machine is not booting to system. please help me to make the machine run.
best regards
Similar Threads:
- Need Help!- Buying English software for Okuma LS30N and Okuma LR15 running on OSP5020L
- okuma osp 100 (okuma mh60)speicher-platine/batteriewscheel
- Need Help!- okuma impact lu 35 with okuma osp 7000l / tool touch off
- INFO? for programming Okuma LOADERs for OKUMA LFS15-2SP ROBUSTURN TWIN SPINDLE CNC
- Okuma OSP3000 & Okuma DTE (data tape emulator)
Please make photo of OKUMA display. I need the error number.
hi , i think the system is not booting , and i need the parameters. i can't catch more photos right now, because the government instructions against corona virus. the city is closed. but i have these photos
.
If I understood, your OKUMA frozen o this message: SBP Versio e7.
If it is so, looks like bubble memory is broken. But please check all power supply in the electrical cabinet. Make photo of power supply unit after the lathe will be frozen. May be some of supplu (+5, +12 of other) broken.
I destroy me bubble memory after one of my power disappeared. The sequence of voltage in CPU unit is strict. And wrong sequence can destry data in memory. It was my lathe. After that I changed the CNC to China.
It was more cheaper then repaire machine, but I lost accurace.
thanks, i will check when i reach the machine.
Could be service board processor as well , good idea to reseat the boards and any “socketed” chips as well. Sometimes connection becomes bad and causes communication alarms like you have.
Best regards,
Experience is what you get just after you needed it.