Help alarm 1100 Okuma


Results 1 to 1 of 1

Thread: Help alarm 1100 Okuma

  1. #1
    Member jorgennorell's Avatar
    Join Date
    Dec 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Help alarm 1100 Okuma



  2. #2
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    3128
    Downloads
    0
    Uploads
    0

    Default Re: Help alarm 1100 Okuma

    hy, i can only help you with next error infos / kindly

    1100 Parameters not set
    The backup data caused an error and the factory-set initial data was forciby loaded. Machine data must be set again.
    [Object]
    None
    [Character-string]
    None
    [Code]
    XXXXYYYY
    XXXX
    bit 0:SPARE
    bit 1:HD backup status file
    bit 2:Low speed NC backup data file
    bit 3:High speed NC backup data file
    bit 4:PLC backup data file
    bit 5:PLC-HMI data file
    bit 6:Alarm history data file
    bit 7:PLC axis data file
    bit 8:POT TOOL data file(M/C only)
    bit 9:MOP TOOL data file(M/C only)
    bit10:MOP TOOL Parameter file(M/C only)
    YYYY
    1:File read open error
    2:File read error
    3:Version check error
    4:Check sum error
    5ouble check sum error
    6:Backup memory check error
    7:File write open error
    8:File write error

    the human body has enough iron to make a nail ... i can also make the hammer :) i mean a plastic hammer


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help alarm 1100 Okuma

Help alarm 1100 Okuma

Help alarm 1100 Okuma