OKUMA LB15 II MW


Results 1 to 3 of 3

Thread: OKUMA LB15 II MW

  1. #1
    Member Bimachine's Avatar
    Join Date
    Nov 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default OKUMA LB15 II MW

    anybody have LB15 II MW manual file ? please help me!

    Similar Threads:


  2. #2
    Member deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    3076
    Downloads
    0
    Uploads
    0

    Default Re: OKUMA LB15 II MW

    hy, i shared a programing manual in here, at post 3, for a newer machine, but it should be compatible to some extend : https://www.cnczone.com/forums/okuma/393294-cam.html

    are you looking for a specific operation type ? kindly

    the human body has enough iron to make a nail ... i can also make the hammer :) i mean a plastic hammer


  3. #3
    Member Bimachine's Avatar
    Join Date
    Nov 2019
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: OKUMA LB15 II MW

    Quote Originally Posted by deadlykitten View Post
    hy, i shared a programing manual in here, at post 3, for a newer machine, but it should be compatible to some extend : https://www.cnczone.com/forums/okuma/393294-cam.html

    are you looking for a specific operation type ? kindly
    thanks deadlykitten.
    I have problems with the sp spindle boot. although I left the G141 but I still can't move it. The error message. for example: G141
    G0 W100, the machine will give an error. With M247 machine also reported an error. I have tried everything. Including the use of your command line above but it did not work.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

OKUMA LB15 II MW

OKUMA LB15 II MW

OKUMA LB15 II MW