hy, i shared a programing manual in here, at post 3, for a newer machine, but it should be compatible to some extend : https://www.cnczone.com/forums/okuma/393294-cam.html
are you looking for a specific operation type ? kindly
anybody have LB15 II MW manual file ? please help me!
Similar Threads:
- Need Help!- please help about okuma LB15 II MW
- Need Help!- Okuma lb15 II-m OSP7000 IGF
- okuma LB15
- Problem- okuma LB15 help
- Problem- Okuma lb15
hy, i shared a programing manual in here, at post 3, for a newer machine, but it should be compatible to some extend : https://www.cnczone.com/forums/okuma/393294-cam.html
are you looking for a specific operation type ? kindly
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
thanks deadlykitten.
I have problems with the sp spindle boot. although I left the G141 but I still can't move it. The error message. for example: G141
G0 W100, the machine will give an error. With M247 machine also reported an error. I have tried everything. Including the use of your command line above but it did not work.