okuma slope machining

[okumamultus]

i have a 2.5 insert endmill that i want to use in a BA=75
how do i touch off tool?

[master8laster]

i have a 2.5 insert endmill that i want to use in a BA=75
how do i touch off tool?

How old is the Multus?
The one im running is an Multus B250II with OSP-P300SA-H control on it.
I just touch of in basic position (TD=XXXXXX) and use G52

BR Masterblaster

[deadlykitten]

I just touch of in basic position (TD=XXXXXX) and use G52

hy 8laster i guess is nice if you have experience with multus & LT's; so far, i have never worked on such machines ...

it seems that he uses G52, like it is shown in his other thread, but i don't know what is missing; all the best

i have a 2.5 insert endmill that i want to use in a BA=75
how do i touch off tool?

hy, my 1st idea would be to let loose the B axis, and tilt the machine using a forklift ... should work

i also looked inside the manuals, trying to find some special functions, that maybe will help you, but unfortunately i can't be specific; pls find attached infos about :
... coordinate system selection function
... tool center point function / tool attitude command
... the 3d coordinate conversion function
... tool posture compensation function / kindly