Auto power shut off


Results 1 to 6 of 6

Thread: Auto power shut off

  1. #1
    Member
    Join Date
    Jan 2009
    Location
    sweden
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Auto power shut off

    Hello all.
    Okuma MA40HA year 2000 whit OSP U100M.
    I have a question regarding the automatic power shut off option. Seems my machine has got it but I can´t figure out how to enable it.
    I cant find a button on the panel, nor by the main switch. I have looked at the switch and it seems to be the type for auto power off.
    It is not the power save I´m after, that works fine.
    What am I missing?
    Thanks.
    /Samuel

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Auto power shut off-apso-jpg  


  2. #2
    Member
    Join Date
    Jan 2009
    Location
    sweden
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: Auto power shut off

    I have now looked into the parameters and found where I can enable the power shut off. I can also chose whether an alarm should trip the power off. And then a time parameter, that delays the shut off. It works, but do I need to change that parameter every time I want to use this function?
    Thanks.



  3. #3
    Member OkumaWiz's Avatar
    Join Date
    Apr 2009
    Location
    United States
    Posts
    1126
    Downloads
    0
    Uploads
    0

    Default

    You do not have to set the parameter every time. Set it and forget it.

    Should auto power off after reaching M2 or M30 once timer has elapsed. I suggest the timer to be set over 3 minutes to ensure full backup has occurred after cycle is complete.

    Experience is what you get just after you needed it.


  4. #4
    Member
    Join Date
    Jan 2009
    Location
    sweden
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: Auto power shut off

    Thanks for the reply.
    Normaly I dont want it to auto power off, just some times when leaving workshop whit machine running. I have seen that some models have a button somewhere to easy turn this on and off.
    In my case, then I have to change the parameter when I want it to power off and then next time uncheck the parameter to make it not?
    Thanks.



  5. #5
    Member OkumaWiz's Avatar
    Join Date
    Apr 2009
    Location
    United States
    Posts
    1126
    Downloads
    0
    Uploads
    0

    Default Re: Auto power shut off

    Yes usually there is a toggle switch on the side of the machine to turn it on and off. If you don’t have it but have the option then you will need to set the bit to make it active. A schedule program would allow you to make x number of parts and then shut down. I’m guessing without auto loading you will not need it. You’ll run both pallets and shut down.

    Experience is what you get just after you needed it.


  6. #6
    Member
    Join Date
    Jan 2009
    Location
    sweden
    Posts
    31
    Downloads
    0
    Uploads
    0

    Default Re: Auto power shut off

    Ok, then I know.
    Thanks



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Auto power shut off

Auto power shut off

Auto power shut off