How to bypass spindle external encoder for okuma lathe osp controller


Results 1 to 3 of 3

Thread: How to bypass spindle external encoder for okuma lathe osp controller

  1. #1
    Member Jasperspindledoctor's Avatar
    Join Date
    Sep 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default How to bypass spindle external encoder for okuma lathe osp controller

    Hi Friends ,
    Any one can help me with the spindle bypass parameter for okuma lathe osp controller “Er-Ma-Sa “
    Please have a look at the attachments

    Similar Threads:
    Attached Thumbnails Attached Thumbnails How to bypass spindle external encoder for okuma lathe osp controller-9247cd4e-5a69-4327-986b-17d33fa4761f-jpg  


  2. #2
    Member Mecanix's Avatar
    Join Date
    Aug 2019
    Posts
    339
    Downloads
    0
    Uploads
    0

    Default Re: How to bypass spindle external encoder for okuma lathe osp controller

    Set the control's param "use encoder" to Bit 0 for the spindle axis. Whatever param<name> that is, most controls have one of those



  3. #3
    Member Jasperspindledoctor's Avatar
    Join Date
    Sep 2019
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Quote Originally Posted by Mecanix View Post
    Set the control's param "use encoder" to Bit 0 for the spindle axis. Whatever param<name> that is, most controls have one of those
    Mecanix, Thanks for your reply ..let me check .
    Will be more helpful if you could give me the parameter number ????



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How to bypass spindle external encoder for okuma lathe osp controller

How to bypass spindle external encoder for okuma lathe osp controller