hi, use M110 before spining the tool; if u wish, share the program, and i'll show you where to put the m110 / kindly
Hello,
I am a maintenance Mechanic and one of our Okuma LB15 lathes just alarmed out with this code ''1291 Alarm A Tool Revolution Command 1''
I found the code explanation in our Alarm and Error list book but I am having trouble understanding where to start trying to fix it.
Under [Code] 1-> The M-tool rotation command is designated when C-axis is not connected.
I am fairly new to maintenance on these machines and have been left alone to fend for myself.
Any help with this would be much appreciated.
Similar Threads:
- Need Help!- Okuma LB15 201 Drive Alarm
- Alarm 110 sdu 1, Okuma lb15
- Need Help!- Okuma LB15 100-4 Diff Alarm
- Need Help!- OKUMA LB15-II MW LATHE Alarm
hi, use M110 before spining the tool; if u wish, share the program, and i'll show you where to put the m110 / kindly
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...