Post Processor

[machinebob1]

Does any one know how to edit the Post Processor for the OSP- P300L for a Okuma LB 3000EXII MYW, so that it only spits the program out as a Sub program.

Similar Threads:

• Need Help!- Post processor for Fanuc Oi mate -TD post processor for lathe for NX or Edgecam
• Need Help!- Siemens NX Post Processor Folders (Siemens NX Post Processor Dosyaları)
• Newbie- Really need post processor for Bobcad v23 to LinuxCNC, this may require custom post?
• Lost Machine and Post Processor lists in Post Process

[deadlykitten]

hello it depends on what cam you are using

try this forum : https://www.cnczone.com/forums/cam-software/

if i may, why do you wish to output the main program as a soubroutine ? kindly

[machinebob1]

Hello, thank you for responding back.
I'm using Fusion 360.
And why do I prefer Subprograms?
I already have the code for my approach, I can use the same code for every live tool. only have to edit RPM, and tool #. The CAM spits out alot of code I don't need. So when i'm editing my geometry the only thing I need to worry about is the geometry ( tool path ). Makes it really fast when making changes to my program, ( copy and paste BAMM!!!! and i'm done )

[deadlykitten]

hello again, for fusion, try the autodesk forum : https://www.cnczone.com/forums/autodesk-cam/

I already have the code for my approach, I can use the same code for every live tool. only have to edit RPM, and tool #

i believe that your soubroutine is something like this :

    turret @ safe position
    coolant on
    index to tool #
    M110
    rpm starting
    >> and here, you insert the code from cam : approach, toolpath
    rpm stop
    coolant off, maybe
    turret @ safe position

copy and paste BAMM!!!! and i'm done

yup, try to go inside that forum, and maybe you will find out how to edit that post

also, if you wish, share your "empty" soubroutine, maybe i can help you boost it / kindly