PROT command only works on files of protection level 1. System files are level 2 and cannot be unprotected by the normal;C command in order to keep them from being tampered with or accidentally deleted. DIR;P should show prot levels.
How to use the PROT command on OSP system?
An alarm occurs when i try this command with protected file
PROT MD0:xxxxx.PBU;C (for do unprotected file)
Thanks
Similar Threads:
https://www.facebook.com/okuma.tuning
PROT command only works on files of protection level 1. System files are level 2 and cannot be unprotected by the normal;C command in order to keep them from being tampered with or accidentally deleted. DIR;P should show prot levels.
Experience is what you get just after you needed it.
Once in OS mode, level 2 can be unprotected to edit such things as gauging MSB files by using PROT command. Warning : you are entering the danger zone.
Most of the system files are compiled so editing is next to impossible. A decompiler is required.
What is it you are trying to edit?
Experience is what you get just after you needed it.
what kind of file is a msg type ?
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
Message
Experience is what you get just after you needed it.