You would need a colon : after the device name. CN0: or TT:
Depending on the control you have, you can set the default port for input or output. Parameter word 44 and 54 if I remember right. Then the device name is not needed.
Been trying to take programs out and put programs in the machine but each time I have been given an error like “2125 puncher error” or “2156 option error”. This is out first time trying this so I’m sure we’re doing something wrong.
We’ve tried P BXXXXX.min [write], P CN0;BXXXXX.min ect.
Similar Threads:
You would need a colon : after the device name. CN0: or TT:
Depending on the control you have, you can set the default port for input or output. Parameter word 44 and 54 if I remember right. Then the device name is not needed.
Experience is what you get just after you needed it.