Looking for help with Okuma LB25 in the Kansas City area.


Results 1 to 4 of 4

Thread: Looking for help with Okuma LB25 in the Kansas City area.

  1. #1
    Registered
    Join Date
    Jan 2006
    Location
    usa
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default Looking for help with Okuma LB25 in the Kansas City area.

    Hello, have a friend that bought a new to him LB25 lathe. Has the OSP500L-G control. Seasoned cnc Machinist needs some hands on help with setup and tool offsets for this control. You will be payed for your knowledge and time.Thank You

    Similar Threads:


  2. #2
    scaring mice @ north pole deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    2277
    Downloads
    0
    Uploads
    0

    Default Re: Looking for help with Okuma LB25 in the Kansas City area.

    hi thumper, look also for an okuma shop in your area : arround here are a few within a normal distance, so it takes me 5-15 minutes to reach them

    even if you receive training, i can tell that such training has a schedule, but if you are not familiarized with such machines, then you may get lost after the 3rd hour of training, and you may have a revelation and ask a question 1 year later about a thing that was presented during the training this happens sometimes ...

    so go with training + talk with your tool supliers, training guy, okuma rep, etc, so to locate your okuma neighbours, so to have a reliable contact close to you


    also, i am in kansas, but i cant explain where ... basically, i am so lost in kansas & i no longer see the aligators / kindly

    if you wish to be famous, first you have to succeed
    ... where is Sid ?



  3. #3
    Registered
    Join Date
    Jan 2006
    Location
    usa
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default Re: Looking for help with Okuma LB25 in the Kansas City area.

    Thank You for the reply, Another board suggested Hartwig in Kansas City. I checked and they have different classes on Okuma training. Lost in Kansas, it does happen lol,alot.



  4. #4
    scaring mice @ north pole deadlykitten's Avatar
    Join Date
    Jun 2015
    Location
    Antarctica
    Posts
    2277
    Downloads
    0
    Uploads
    0

    Default Re: Looking for help with Okuma LB25 in the Kansas City area.

    hi thumper, training is 1st step, but after training is possible to call your okuma rep, or trainer, 1-2-3 times / day, at least for a while ....

    is good also to have that okuma shop near by, esecially is better to have such neighbours, because they deal with the real thing, while training is done by people that only train

    feedback from the training person may not be as strong as from an experienced person that works in a shop near you

    also, if your training guy seems to be experimented, then considere to hire him ( good trainers find a job easy ) ... however, is hard to tell if a trainer is experimented, because at this moment, whatever he sais seems to be ok ... i don't know, check the waters, and good luck

    Last edited by deadlykitten; 08-11-2018 at 02:26 AM.
    if you wish to be famous, first you have to succeed
    ... where is Sid ?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Looking for help with Okuma LB25 in the Kansas City area.

Looking for help with Okuma LB25 in the Kansas City area.