start attached thing
hey guys, i have an okuma MA650 with an alarm that i cant track down. the controller is an OSP200 and the alarm number is "3721 ALARM-C air pressure drop 20"
Similar Threads:
start attached thing
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...
although i appreciate the reply, i dont think that is the problem. we have a substantial air system in our new shop. wondering if it could just be a faulty switch?
what is the value of the manometer behind the cnc ? if it shows 0.5-0.6mpa, presuming it is working, then the problem is inside the cnc, and in this case i can't help
be sure that air input is not a problem maybe a joker is messing with the valves ...
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...