Need Help! OKUMA LCS-15H alarm 3901


Results 1 to 3 of 3

Thread: OKUMA LCS-15H alarm 3901

  1. #1
    Member
    Join Date
    Jun 2016
    Location
    Poland
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default OKUMA LCS-15H alarm 3901

    I have problem with okuma ( control:OSP 700L) machine lcs 15H, I have external alarm 3901, which means this fault? How can i view the plc ladder in this control OSP 700L?

    please i need helps.

    Similar Threads:


  2. #2
    Member
    Join Date
    Aug 2012
    Location
    USA
    Posts
    164
    Downloads
    0
    Uploads
    0

    Default Re: OKUMA LCS-15H alarm 3901

    I believe that indicates that you have an external alarm; look through your schematic for an external alarm input and then check the signal in check data that corresponds to the input in the schematic; I believe it should be high (on) under normal conditions and off (low) when it is in alarm state. No ladder on the 700L control.



  3. #3
    Member OkumaWiz's Avatar
    Join Date
    Apr 2009
    Location
    United States
    Posts
    1262
    Downloads
    0
    Uploads
    0

    Default Re: OKUMA LCS-15H alarm 3901

    Typically it means that a device such as a bar feeder or coolant pump, etc. is in a fault condition. Something other than the machine is wrong, thus, external device.

    Experience is what you get just after you needed it.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

OKUMA LCS-15H  alarm 3901

OKUMA LCS-15H  alarm 3901