okuma lb-15 with osp5000l-g control

[msherman]

chuck clamp light takes almost 5 seconds to come on and allow me to push the cycle start button
this is a new to me machine i am sure it is on some kind of timer i just dont know which parameters controls this
the light in the back has not effect on this
also it there a parameter list which explains the function of all or most parameters
thanks

Similar Threads:

• Need Help!- Okuma LB15 OSP5000L control question, new owner
• okuma lc40 twin turret osp5000l-g control
• okuma lc40 twin turret osp5000l-g control
• OKUMA LR15 OSP5000L-G CONTROL PANEL E0105-800-055-1 CNC
• Need Help!- Okuma OSP5000L-G

[deadlykitten]

hi, on my lathe, besides the 2 proximity senzors, are also 2 digital pressure senzors

if you have also digitals, check them not to have lag on their display you should see the pressure value; if it raises fast until a maximal value, but the controller still does not confirm, than i have no clue / kindly !