congratulations / you finally achieved 100% spindle time
many shops have to work really hard to reach at least 70%, but voila, you did it like a charm
is easy to reach the top, but can you stay there ?
sorry defcom, i have no clue
Hello,
I have OKUMA MC4-VA with OSP5000 control and YASKAWA VARISPEED 626MT2B drive.
From couple of days I have a big problem:
when I tried to stop spindle it does not stop but slow down and rotate all the time 20-70rpm but not stable
MDI and RESET, STOP or ORIENTATION buttons does not work, Only way to stop spindle is turn controll off..
VIDEO: https://drive.google.com/open?id=1TK...0BnJLsKCmjqKjT
I have no idea where is the problem, can someone help me?
Thank you
Similar Threads:
congratulations / you finally achieved 100% spindle time
many shops have to work really hard to reach at least 70%, but voila, you did it like a charm
is easy to reach the top, but can you stay there ?
sorry defcom, i have no clue
we are merely at the start of " Internet of Things / Industrial Revolution 4.0 " era : a mix of AI, plastics, human estrangement, powerful non-state actors ...