Okuma LB15 OSP5000L control question, new owner

[Jeff9612]

Looking for assistance in changing the rapid speed of the lathe until I get comfortable with it.
Also wondering if anyone knows if there is a way to show on the screen, the actual position with a distance to go or the program scrolling with the actual position.

Any help would be much appreciated, only worked with Fanuc controls

Thanks
Jeff

Similar Threads:

• okuma lc40 twin turret osp5000l-g control
• okuma lc40 twin turret osp5000l-g control
• Need Help!- Okuma LB15 Front control Panel Dead
• OKUMA LR15 OSP5000L-G CONTROL PANEL E0105-800-055-1 CNC
• Okuma LB15 - osp5000L software

[rcs60]

i don't run one to often
i found the rapids on set up can be controlled with the use of the single box button until the program/tooling is proven out
on power up the screen that i look at is actual position numbers i use the page down button and the screen has the program on the right side and the position/distance to go and rpms on the left

[Jeff9612]

Thanks for the help, I was able to find the screen that I wanted

[albertob]

buen dia alguien me puede ayudar con este error LOAD VERIFY FF8016 enciendo la maquina y no termina de cargar o entrar y se queda este error en la pantalla, si me pueden ayudar se los agradeceria.

[albertob]

BUEN DIA NECESITO DE SU AYUDA TENGO UNA MAQUINA OKUMA LC20 MOD 88 CON UN SISTEMA OSP5000L CUANDO ARRANCO LA MAQUINA SE QUEDA EN LA PANTALLA EL ERROR LOAD VERIFY FF8016 Y NO TERMILNA DE CARGAR, ALGUIEN ME PUEDE DAR SOPORTE CON ESTE ERROR SE LOS AGRADECERIA MUCHO.