Change file in cnc memory

[kurmay]

Can i change a file (etc ***.POL) in okuma cnc memory FR0D:
Control unit OSP-7000L
i want to copy and replace a file in floppy with CNC memory

Similar Threads:

• how to change tool offset memory type on meldas 500?
• Fadal 4020 save file in memory
• Haas Vf1 dnc File transfer And Memory size ?
• Need Help!- How to Change Memory Available? #9921
• Newbie- num 1060w how to change memory board batteries?

[underthetire]

Why are you messing with a .POL file?

[Superman]

I'm leaving this one alone

The POL files are what sets up & controls the machine.......& are specific to each individual machine
- they are loaded as a complete set of files

change one file would be like trying to separate the wires behind the dash with a pocket knife........in the dark
- when all you wanted to do is change a light globe

Documentation for each files' purpose is not usually released by Okuma
- as far as I'm aware, the service personnel don't even mess with what you want to do

[kurmay]

I want to change language of OSP IGF german to english. All words and messages in MSG files. Sample screen below

[Superman]

POL file is not a MSG file.......different function

But language is usually changed by the machine disks upon an install

[Algirdas]

the language is possible to change that way.

[kurmay]

Does anybody having the IGF V3.7B english MSG files or software diskette images?
The floppies are

ONE TOUCH IGF-L PACKAGE FLOPPY 1
ONE TOUCH IGF-L PACKAGE FLOPPY 2

or you can copy CNC ( FR0D: ) to osp formatted floppy these files
LOIA37BA-ENG-1.MSG
LOIA37BA-ENG-2.MSG
LOIA37BA-ENG-3.MSG

[behsafaee]

I can help to create a new set of floppy-disk backup of OSP5020 and OSP7000 system floppy disks.
In this case if any floppy in the old set is damaged you can use the other set.

Barry
Okuma spindle drive, Fanuc servo drive, repair, Consulting | CNC Open Solutions

[terkaa]

Hi,

I have some TM-APT IGF-L floppies. I will check this tomorrow. What Lathe type?

Tero

[terkaa]

Nope sorry.