Floppy disk


Results 1 to 9 of 9

Thread: Floppy disk

  1. #1
    Registered
    Join Date
    May 2011
    Location
    VN
    Posts
    91
    Downloads
    0
    Uploads
    0

    Default Floppy disk

    Hello,
    I have the CNC machine OKUMA OSP5000 MC-4VB.
    Now I want to change type 8 inch floppy to 3-1/2 inch floppy.
    Now type 8 inch floppy the bab. It can not run.
    Do you have the drawing pinout " 50pin " of type 8 inch " DDF8-3D-41A " floppy osp5000?
    Please you see the picture of type 8inch floppy.
    Please help me. I will send the gift to you.
    My email : kntran77@yahoo.com
    Thank you.Floppy disk-floppy-8-inch-jpg

    Similar Threads:


  2. #2
    Registered
    Join Date
    Jun 2015
    Location
    Mexico
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Floppy disk

    Hi.
    I'm wondering if you could did this, because i'm trting to do the same operation to a Okuma LC40



  3. #3
    Registered
    Join Date
    May 2011
    Location
    VN
    Posts
    91
    Downloads
    0
    Uploads
    0

    Default Re: Floppy disk

    Hello,
    Have you the manual and floppy disk of the Okuma ?
    Please support for me.
    Thank you,



  4. #4
    Gold Member fordav11's Avatar
    Join Date
    Aug 2011
    Location
    Fordaville
    Posts
    2517
    Downloads
    0
    Uploads
    0

    Default Re: Floppy disk

    the drive was probably built more than 35 years ago. you will be lucky to find anything about it now.
    pull the drive out of the frame and look for the REAL manufacturer (not Okuma)
    and the model number. then report back here with that info.



  5. #5
    Registered
    Join Date
    May 2011
    Location
    VN
    Posts
    91
    Downloads
    0
    Uploads
    0

    Default Re: Floppy disk

    Hello,
    Have you the disk software of the Okuma Osp5000M-G MC-4VB ?
    Thank you,



  6. #6
    Flies Fast Superman's Avatar
    Join Date
    Dec 2008
    Location
    Antarctica
    Posts
    2788
    Downloads
    0
    Uploads
    0

    Default Re: Floppy disk

    Quote Originally Posted by KHOATRANNGOC View Post
    Hello,
    I have the CNC machine OKUMA OSP5000 MC-4VB.
    Now I want to change type 8 inch floppy to 3-1/2 inch floppy.
    Now type 8 inch floppy the bab. It can not run.
    Do you have the drawing pinout " 50pin " of type 8 inch " DDF8-3D-41A " floppy osp5000?
    Please you see the picture of type 8inch floppy.
    Please help me. I will send the gift to you.
    My email : kntran77@yahoo.com
    Thank you.
    That machine only came with 8" system disks & drive.....also had a reel-to-reel tape reader

    Trying to change to a 3-1/2" drive and all your machine disks are then useless, & you will never be able to resurrect your machine to working condition if a problem occurs....... on a machine of that vintage, it could be tomorrow

    Get the RS-232 working, as PIP is standard ( better if you had the DNC option ) for the loading of programs
    -
    and ..... say goodbye to using floppies ( floppies in the workshop don't last very long, & they also are becoming rarer )



  7. #7
    Registered
    Join Date
    Jun 2015
    Location
    Mexico
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Floppy disk

    Hi KHOATRANNGOC

    I have the manual and the disk software but the disk drive isn't works, so i want to change the type of floppy because i have the software in 3 1/4 disk too.

    tell me if you need any information of the manual.



  8. #8
    Registered
    Join Date
    May 2011
    Location
    VN
    Posts
    91
    Downloads
    0
    Uploads
    0

    Default Re: Floppy disk

    Quote Originally Posted by MMA View Post
    Hi KHOATRANNGOC

    I have the manual and the disk software but the disk drive isn't works, so i want to change the type of floppy because i have the software in 3 1/4 disk too.

    tell me if you need any information of the manual.
    Hello,
    Please send to me of the picture disk software.

    Thank you,



  9. #9
    Member
    Join Date
    Jul 2017
    Location
    Mexico
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default Re: Floppy disk



    hola buen día Tengo un problema con la unidad en mi okuma control osp5000 Espero que aún tenga el manual y que pueda compartirlo:
    frapoindustrial@hotmail.com
    saludos



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Floppy disk

Floppy disk