Did you try M61 and M62? Did you ever get a HMC book? I have a hard copy
Hi there!
Looking for M-codes to verify pallets.
A complete list of M codes for a OPKK MHC 600 would be super!!
Similar Threads:
Did you try M61 and M62? Did you ever get a HMC book? I have a hard copy
Check Keep relay K22.5 equal to 1
machine internal macro for pallet now active
#1014=pallet 1------1 active o ouside
#1015=pallet 2------1 active 0 outside
Just right a macro before the program starts to check for the right one
Can supply theem if needed
Thanks for the info. I can write this. It will help if our operators have the wrong pallet inside to start the cycle. Now the machine faults and the operator has to manually M code the pallet around.
Thanks again.
O0001(MAIN )
N10G200
N20M98P0003(TOOL LIFE CHECK)
M3S100
N30M60
()
N40IF[#1014GE1]GOTO100
N50IF[#1015GE1]GOTO200
()
N100(SUB PROGRAMS FOR PALLET 1)
IF[#545EQ1]GOTO120 (Skip Pallet)
N101M98P1101(SPOTFACE LOCK HOLE)
N102M98P1102(DRILL LOCK HOLE)
N103M98P1103(TAP LOCK HOLE)
N120M99
()
N200(SUB PROGRAMS FOR PALLET 2)
IF[#546EQ1]GOTO220 (Skip pallet)
N201M98P1201(SPOTFACE LOCK HOLE)
N202M98P1202(DRILL LOCK HOLE)
N203M98P1203(TAP LOCK HOLE)
N206M98P1206(REAM EAR HOLES)
N207M98P1207(DRILL - P - HOLES)
N220M99
M30
Hope this gets you started
NEED MANUALS FOR OKK MCH 600 , PLS HELP, REPLY TO ksraghuvir@gmail.com