Need Help! M16 orient moving is not good

Results 1 to 2 of 2

Thread: M16 orient moving is not good

  1. #1
    Member obrm's Avatar
    Join Date
    Aug 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default M16 orient moving is not good

    I'm using okk's pcv-510 machining center.

    There is a problem with tool change.

    While in M16 commend, spindle can't find the location and spinning countinously. With an error message 2026 oreint moving is not good.

    This proble is not in every situation. It occurred when machine using over some hour.

    I try to do something. Already change magnetic sensor and plc plate. but still not good working.

    Is there anyone can help? I also need a pcv-510's manuals too.

    thanks.

    Similar Threads:


  2. #2
    Member RTDdon's Avatar
    Join Date
    Mar 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: M16 orient moving is not good

    I'm wondering if you found the solution to this, I'm experiencing a similar problem. I have an OKK PCV-55 and the spindle will not orient. Using m-code or pushing control panel button to orient the spindle, it spins slowly and slowly comes to a stop and then a "1026 spindle orient moving is not good" alarm. I've also replaced the magnetic sensor and PCB and it didn't fix it.

    Thank You!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

M16 orient moving is not good

M16 orient moving is not good

M16 orient moving is not good