How to check to see if my Meldas-M0/M0b control can take drip feed

Results 1 to 1 of 1

Thread: How to check to see if my Meldas-M0/M0b control can take drip feed

  1. #1
    Registered
    Join Date
    Mar 2017
    Location
    United States
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default How to check to see if my Meldas-M0/M0b control can take drip feed

    Hello,

    We have a 1988 OKK PCV-40 Vertical mill with Mitsubishi Meldas - M0/M0B control. We are looking into buying a USB to DNC transfer box but we need to make sure the control has the drip feed option.

    Also if it is even wroth the effort to do this. I have heard these older machines have issues drip feeding with modern code and can stutter making a circle or surfacing.


    Thanks

    Similar Threads:
    Attached Thumbnails Attached Thumbnails How to check to see if my Meldas-M0/M0b control can take drip feed-img_20190115_153306-jpg   How to check to see if my Meldas-M0/M0b control can take drip feed-img_20190115_161334-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How to check to see if my Meldas-M0/M0b control can take drip feed

How to check to see if my Meldas-M0/M0b control can take drip feed