NM-135 gibs adjustments

Results 1 to 8 of 8

Thread: NM-135 gibs adjustments

  1. #1
    Member gstprecision's Avatar
    Join Date
    Oct 2018
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default NM-135 gibs adjustments

    Hey guys. I need to adjust the gibs on my NM135 and since I can’t find a manual with picture I do not know which screws is the tapered one and which one is the lock.

    Anyone can point me in the right direction?

    Thanks

    Similar Threads:


  2. #2
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    329
    Downloads
    0
    Uploads
    0

    Default Re: NM-135 gibs adjustments

    .

    Last edited by mklotz70; 08-19-2019 at 12:19 PM. Reason: incorrect info
    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  3. #3
    Member gstprecision's Avatar
    Join Date
    Oct 2018
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: NM-135 gibs adjustments

    Hey MKlotz70, I turned on PM option.

    I cannot see the link you posted, says video unavailable.

    I have tapered gibs on that machine if that helps.

    Thanks



  4. #4
    Member
    Join Date
    Jan 2016
    Posts
    291
    Downloads
    0
    Uploads
    0

    Default Re: NM-135 gibs adjustments

    NM-135 gibs adjustments-gibs-pngThis is from the Pulsar manual. Hopefully it will help some.

    Attached Thumbnails Attached Thumbnails NM-135 gibs adjustments-gibs-png  


  5. #5
    Member
    Join Date
    Jan 2016
    Posts
    291
    Downloads
    0
    Uploads
    0

    Default Re: NM-135 gibs adjustments

    A quick search found the 135 manual like you said without pictures.

    http://s172429501.onlinehome.us/NM-135%20manual.pdf

    - - - Updated - - -

    A quick search found the 135 manual like you said without pictures.

    http://s172429501.onlinehome.us/NM-135%20manual.pdf



  6. #6
    Member
    Join Date
    Aug 2007
    Location
    usa
    Posts
    329
    Downloads
    0
    Uploads
    0

    Default Re: NM-135 gibs adjustments

    The Torus has straight gibs, so it wouldn't be of any help. NYCCNC on youtube has done tapered gib adjustments on his Tormachs before. Video is typically better than pictures.

    Don't have to be too bright to be me :)
    bluehandsvideo on youtube


  7. #7
    Member gstprecision's Avatar
    Join Date
    Oct 2018
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: NM-135 gibs adjustments

    Steve303, the Pulsar is different it uses straight gibs with many set screws.



  8. #8
    Member gstprecision's Avatar
    Join Date
    Oct 2018
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default Re: NM-135 gibs adjustments

    Thanks for the replies. I came home this afternoon and took the gibs apart. On the X axis the right side is the adjustment and the left a stop/lock.

    On the Y it is front is adjustment and on the Z it is the top one.

    The adjustment screw is recessed in the gibs and the lock sits on top (over the end).

    Hope that makes sense!!!!

    GST



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

NM-135 gibs adjustments

NM-135 gibs adjustments

NM-135 gibs adjustments